050-645-4504中文资料
ELECTRICAL
ImpedanceFrequency RangeVoltage Rating *Insulation ResistanceContact ResistanceReflection Coefficient *
MECHANICAL
Withdrawal force inner female contactWithdrawal force inner male contactInsertion force between jacks and plugsWithdrawal force between jacks and plugs
Materials
Finish/Plating
ENVIRONMENTALTemperature RatingGENERAL
Connector Durability
Standards
75 nominal0 - 1 GHz
At Sea Level = 330 Vrms10 G minimum
Inner contact = 4 m maximumOuter contact = 2 m maximumWith f = 0.1 GHz= 0.02 maximumWith f = 0.1 – 0.5 GHz= 0.04 maximumWith f = 0.5 – 1.0 GHz= 0.10 maximum
0.5 N (0.11 lbs.) minimum1.7 N (0.38 lbs.) minimum
Screw types: 12 N (2.7 lbs.) maximum. Push-pull type: 20 N (4.5 lbs.) maximumScrew types: 22 N (4.9 lbs.) minimum. Push-pull type: 20 N (4.5 lbs.) maximumBodies and nuts: Brass. Inner male contact: Brass.
Inner female contact and outer male contact: Beryllium copper. Insulators: PTFE. 1.6/5
Crimp ferrules: Annealed copper alloy.
Contact surfaces: Gold over nickel. Female bodies: Gold over nickel. Male bodies: Nickel or silver. Nutsand crimp ferrules: Nickel 40°C to 85°C
500 matings minimum
CECC 22240, DIN 47295, IEC 169-13
* Guideline value only– will depend on cable and connector type
Dimensions are shown in mm (inch)
Dimensions subject to change
59
