KBPC25005W THRU KBPC2510W SILICON BRIDGE RECTIFIERS Reverse Voltage - 50 to 1000 Volts Forward Current - 25.0 Amperes

KBPC-25W

FEATURES 0.452 (11.5) MAX.

0.591 (15.0) 0.042(1.10) DIA. 0.038(0.97)

MAX.

The plastic package carries Underwriters Laboratory Flammability Classification 94V-0 Ideal for printed circuit boards Low reverse leakage High forward surge current capability High temperature soldering guaranteed: 260 C/10 seconds,at 5 lbs. (2.3kg) tension

1.181(30.0) 1.102(28.0) 0.673(17.1) 0.633(16.1)

HOLE FOR NO.8 SCREW

AC 0.732(18.6) 0.692(17.6)

1.181(30.0)

MECHANICAL DATA Case: Metal case Terminals: Lead 0.040” (1.02mm) diameter. Polarity: Polarity symbols marked on case Mounting:Thru hole for#8 screw,20in.-lbs. torque max. Weight:0.93 ounce, 26.4 grams

+

1.102(28.0) 0.468(11.9) 0.429(10.9)

-

AC

0.732(18.6) 0.692(17.6)

0.033x.250 (0.8x6.4)

Dimensions in inches and (millimeters)

MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 C ambient temperature unless otherwise specified. Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%.

MDD Catalog Number Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward output rectified current at TC=50 C (Note 1,2) Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Rating for Fusing(t<8.3ms) Maximum instantaneous forward voltage dorp per bridge element at 12.5A Maximum DC reverse current TA=25 C at rated DC blocking voltage TA=100 C Isolation voltage from case to leads Typical Thermal Resistance (Note 2) Operating junction temperature range storage temperature range

SYMBOLS

KBPC 25005W

KBPC 2501W

KBPC 2502W

KBPC 2504W

KBPC 2506W

KBPC 2508W

KBPC 2510W

UNITS VOLTS VOLTS VOLTS Amps Amps A2s VoltsµA mA VAC C/W C C

VRRM VRMS VDC I(AV)

50 35 50

100 70 100

200 140 200

400 280 400 25

600 420 600

800 560 800

1000 700 1000

IFSM I2t VF IR VISO RθJA TJ TSTG

300.0 373 1.1 10 1.0 2500 2.0 -65 to+150 -65 to+150

NOTES: 1.Unit mounted on 5” x6” x4.9” thick(12.8cmx15.2cmx12.4cm)Al.plate. 2.Bolt dowm on heat-sink with silicone thermal compound between bridge and mounting surface for maximum heat transfer efficiency with#8 screw.

MDD ELECTRONIC